Laticrete Hydro Ban

LATICRETE® Hydro Ban® is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. LATICRETE Hydro Ban is a single component, self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. LATICRETE Hydro Ban bonds directly to a wide variety of substrates.

  • Allow for flood testing in 2 hours at 21°C or higher*
  • Does not require the use of fabric**
  • Bonds directly to metal and PVC plumbing fixtures only
  • Thin; only 0.5 mm – 0.8 mm thick when cured
  • Changes in colour from a light sage to an olive green when cured
  • Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Contains antimicrobial product protection
  • Rapid drying for a faster time to tile
  • Lighter colour for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane
  • Refer to cautions section of data sheet for more information on curing
    ** For gaps 3 mm or less see TDS1003 for complete instructions
    Pack size: 15L Pail

Data Sheet