Laticrete Hydro Ban

Laticrete-Hydro-Ban

LATICRETE® Hydro Ban® is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. LATICRETE Hydro Ban is a single component, self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. LATICRETE Hydro Ban bonds directly to a wide variety of substrates.

– Allow for flood testing in 2 hours at 21°C or higher*
– Does not require the use of fabric**
– Bonds directly to metal and PVC plumbing fixtures only
– Thin; only 0.5 mm – 0.8 mm thick when cured
– Changes in colour from a light sage to an olive green when cured
– Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
– “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
– Exceeds ANSI A118.10 and A118.12
– IAPMO approved
– Contains antimicrobial product protection
– Rapid drying for a faster time to tile
– Lighter colour for ease of inspection
– Safe—no solvents and non-flammable
– Install tile, brick and stone directly onto membrane
* Refer to cautions section of data sheet for more information on curing
** For gaps 3 mm or less see TDS1003 for complete instructions
Pack size: 15L Pail

Data Sheet